dmesg - NVIDIA Tegra 3 cardhu
Initializing cgroup subsys cpu
Linux version 3.1.10-gfc993d9 (buildbrain@mobile-u64-111) (gcc version 4.5.3 (crosstool-NG [email protected]) ) #1 SMP PREEMPT Fri Nov 2 16:36:53 PDT 2012
CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: cardhu
Ignoring unrecognised tag 0x41000801
Ignoring unrecognised tag 0x41000801
Ignoring unrecognised tag 0x41000801
Ignoring unrecognised tag 0x41000801
Ignoring unrecognised tag 0x41000801
Ignoring unrecognised tag 0x41000801
Ignoring unrecognised tag 0x41000801
Found tegra_fbmem: 00805560@bc7d7000
Tegra reserved memory:
LP0: bc7cb000 - bc7ccfff
Bootloader framebuffer: bc7d7000 - bcfdcfff
Framebuffer: be700000 - beffffff
2nd Framebuffer: bf000000 - bfffffff
Carveout: 00000000 - 00000000
Vpr: 00000000 - 00000000
Memory policy: ECC disabled, Data cache writealloc
On node 0 totalpages: 255488
free_area_init_node: node 0, pgdat c0a15280, node_mem_map c0c09000
Normal zone: 1728 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 194880 pages, LIFO batch:31
HighMem zone: 576 pages used for memmap
HighMem zone: 58304 pages, LIFO batch:15
fuse_speedo_calib: ATE prog ver 2.5
Tegra3: CPU Speedo ID 2, Soc Speedo ID 2
Tegra Revision: A03 SKU: 0x81 CPU Process: 2 Core Process: 0
tegra: PLLP fixed rate: 408000000
Lowering sbus maximum rate from 378000000 to 334000000
Lowering vi maximum rate from 470000000 to 425000000
Lowering vde maximum rate from 600000000 to 520000000
Lowering mpe maximum rate from 600000000 to 520000000
Lowering 2d maximum rate from 600000000 to 520000000
Lowering epp maximum rate from 600000000 to 520000000
Lowering 3d maximum rate from 600000000 to 520000000
Lowering 3d2 maximum rate from 600000000 to 520000000
Lowering se maximum rate from 625000000 to 520000000
Lowering host1x maximum rate from 300000000 to 267000000
Lowering cbus maximum rate from 700000000 to 520000000
Lowering pll_c maximum rate from 1400000000 to 1066000000
Lowering ndflash maximum rate from 240000000 to 200000000
Lowering sbc1 maximum rate from 160000000 to 100000000
Lowering sbc2 maximum rate from 160000000 to 100000000
Lowering sbc3 maximum rate from 160000000 to 100000000
Lowering sbc4 maximum rate from 160000000 to 100000000
Lowering sbc5 maximum rate from 160000000 to 100000000
Lowering sbc6 maximum rate from 160000000 to 100000000
Lowering dsia maximum rate from 500000000 to 432500000
Lowering dsib maximum rate from 500000000 to 432500000
Lowering cpu_g maximum rate from 1700000000 to 1400000000
tegra3_dvfs: cold offset 50000000 is too high for regular dvfs limit 1000000
tegra3_dvfs: cold offset 50000000 is too high for regular dvfs limit 1000000
tegra3_dvfs: cold offset 50000000 is too high for regular dvfs limit 1000000
tegra3_dvfs: cold offset 50000000 is too high for regular dvfs limit 1000000
tegra dvfs: VDD_CPU nominal 1125mV, scaling enabled
tegra dvfs: VDD_CORE nominal 1300mV, scaling enabled
L310 cache controller enabled
l2x0: 8 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7c080001, Cache size: 1048576 B
PERCPU: Embedded 8 pages/cpu @c1511000 s11200 r8192 d13376 u32768
pcpu-alloc: s11200 r8192 d13376 u32768 alloc=8*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 253184
Kernel command line: tegraid=30.1.3.0.0 mem=1024M@2048M commchip_id=0 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,0 console=tty1 usbcore.old_scheme_first=1 lp0_vec=8192@0xbc7cb000 tegra_fbmem=8410464@0xbc7d7000 core_edp_mv=1300 audio_codec=wm8903 board_info=c5b:b01:4:43:3 root=/dev/mmcblk1p1 rw rootwait tegraboot=sdmmc gpt gpt_sector=31105023 android.kerneltype=normal
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 998MB = 998MB total
Memory: 991220k/991220k available, 57356k reserved, 227296K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xff000000 - 0xffe00000 ( 14 MB)
vmalloc : 0xf0800000 - 0xf8000000 ( 120 MB)
lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090415c (9201 kB)
.init : 0xc0905000 - 0xc0968bc0 ( 399 kB)
.data : 0xc096a000 - 0xc0a18a1c ( 699 kB)
.bss : 0xc0a18a40 - 0xc0a90e28 ( 481 kB)
Preemptible hierarchical RCU implementation.
NR_IRQS:800
sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
Console: colour dummy device 80x30
console [tty1] enabled
Calibrating delay loop... 1987.37 BogoMIPS (lpj=9936896)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys debug
Initializing cgroup subsys cpuacct
Initializing cgroup subsys freezer
CPU: Testing write buffer coherency: ok
ftrace: allocating 23617 entries in 70 pages
hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
CPU1: Booted secondary processor
CPU2: Booted secondary processor
CPU3: Booted secondary processor
Brought up 4 CPUs
SMP: Total of 4 processors activated (7949.51 BogoMIPS).
devtmpfs: initialized
print_constraints: dummy:
NET: Registered protocol family 16
host1x bus init
cardhu_edp_init: CPU regulator 6000 mA
Selecting UARTA as the debug console
The debug console clock name is uarta_dbg
serial8250.0: ttyS0 at MMIO 0x70006000 (irq = 68) is a Tegra
console [ttyS0] enabled
Registering the core regulator
Clear bootloader IO dpd settings
Registering gpio keys
*** MPU START *** mpuirq_init...
*** MPU END *** mpuirq_init...
tegra: validated EMC DFS table
hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
hw-breakpoint: maximum watchpoint size is 4 bytes.
tegra_iovmm_register: added iovmm-smmu
bio: create slab at 0
i2c-core: driver [tps6591x] using legacy suspend method
i2c-core: driver [tps6591x] using legacy resume method
i2c-core: driver [max8907c] using legacy suspend method
i2c-core: driver [max8907c] using legacy resume method
i2c-core: driver [ricoh583] using legacy suspend method
i2c-core: driver [ricoh583] using legacy resume method
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
tegra-otg tegra-otg: otg transceiver registered
tps6591x 4-002d: VERNUM is 02
print_constraints: tps6591x_VIO: 1500 3300 mV at 1800 mV normal standby
print_constraints: tps6591x_VDD_1: 600 1500 mV at 1200 mV normal standby
print_constraints: tps6591x_VDD_2: 600 1500 mV at 1500 mV normal standby
print_constraints: tps6591x_VDDCTRL: 600 1400 mV at 1025 mV normal standby
print_constraints: tps6591x_LDO_1: 1000 3300 mV at 1050 mV normal standby
set_supply: tps6591x_LDO_1: supplied by tps6591x_VDD_2
print_constraints: tps6591x_LDO_2: 1050 mV normal standby
set_supply: tps6591x_LDO_2: supplied by tps6591x_VDD_2
print_constraints: tps6591x_LDO_3: 1000 3300 mV at 1000 mV normal standby
print_constraints: tps6591x_LDO_4: 1000 3300 mV at 1200 mV normal standby
print_constraints: tps6591x_LDO_5: 1000 3300 mV at 1800 mV normal standby
print_constraints: tps6591x_LDO_6: 1200 mV normal standby
set_supply: tps6591x_LDO_6: supplied by tps6591x_VIO
print_constraints: tps6591x_LDO_7: 1200 mV normal standby
set_supply: tps6591x_LDO_7: supplied by tps6591x_VIO
print_constraints: tps6591x_LDO_8: 1000 3300 mV at 1000 mV normal standby
set_supply: tps6591x_LDO_8: supplied by tps6591x_VIO
print_constraints: tps62361: 500 1770 mV at 1300 mV normal standby
Advanced Linux Sound Architecture Driver Version 1.0.24.
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
NFC: NFC Core ver 0.1
NET: Registered protocol family 39
print_constraints: fixed_reg_en_5v_cp: 5000 mV normal standby
print_constraints: fixed_reg_en_5v0: 5000 mV normal standby
print_constraints: fixed_reg_en_ddr: 1500 mV normal standby
print_constraints: fixed_reg_en_3v3_sys: 3300 mV normal standby
print_constraints: fixed_reg_en_3v3_modem: 3300 mV normal standby
print_constraints: fixed_reg_en_vdd_pnl1: 3300 mV normal standby
set_supply: fixed_reg_en_vdd_pnl1: supplied by fixed_reg_en_3v3_sys
print_constraints: fixed_reg_cam3_ldo_en: 3300 mV normal standby
set_supply: fixed_reg_cam3_ldo_en: supplied by fixed_reg_en_3v3_sys
print_constraints: fixed_reg_en_vdd_com: 3300 mV normal standby
set_supply: fixed_reg_en_vdd_com: supplied by fixed_reg_en_3v3_sys
print_constraints: fixed_reg_en_3v3_fuse: 3300 mV normal standby
set_supply: fixed_reg_en_3v3_fuse: supplied by fixed_reg_en_3v3_sys
print_constraints: fixed_reg_en_3v3_emmc: 3300 mV normal standby
set_supply: fixed_reg_en_3v3_emmc: supplied by fixed_reg_en_3v3_sys
print_constraints: fixed_reg_en_vdd_sdmmc1: 3300 mV normal standby
set_supply: fixed_reg_en_vdd_sdmmc1: supplied by fixed_reg_en_3v3_sys
print_constraints: fixed_reg_en_3v3_pex_hvdd: 3300 mV normal standby
set_supply: fixed_reg_en_3v3_pex_hvdd: supplied by fixed_reg_en_3v3_sys
print_constraints: fixed_reg_en_1v8_cam: 1800 mV normal standby
set_supply: fixed_reg_en_1v8_cam: supplied by tps6591x_VIO
print_constraints: fixed_reg_en_vdd_bl: 5000 mV normal standby
print_constraints: fixed_reg_en_vdd_bl2: 5000 mV normal standby
print_constraints: fixed_reg_en_usb1_vbus_oc: 5000 mV normal standby
set_supply: fixed_reg_en_usb1_vbus_oc: supplied by fixed_reg_en_5v0
print_constraints: fixed_reg_en_usb3_vbus_oc: 5000 mV normal standby
set_supply: fixed_reg_en_usb3_vbus_oc: supplied by fixed_reg_en_5v0
print_constraints: fixed_reg_cam1_ldo_en: 2800 mV normal standby
set_supply: fixed_reg_cam1_ldo_en: supplied by fixed_reg_en_3v3_sys
print_constraints: fixed_reg_cam2_ldo_en: 2800 mV normal standby
set_supply: fixed_reg_cam2_ldo_en: supplied by fixed_reg_en_3v3_sys
print_constraints: fixed_reg_en_vddio_vid_oc: 5000 mV normal standby
set_supply: fixed_reg_en_vddio_vid_oc: supplied by fixed_reg_en_5v0
tegra: started io power detection dynamic control
tegra: NO_IO_POWER setting 0x200
Switching to clocksource timer_us
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
Switched to NOHz mode on CPU #2
Switched to NOHz mode on CPU #3
nvmap_page_pool_init: nvmap uc page pool size=30975 pages
nvmap_page_pool_init: nvmap pool = uc, highmem=30975, pool_size=30975,totalram=247805, freeram=215894, totalhigh=56824, freehigh=25774
nvmap_page_pool_init: nvmap wc page pool size=30975 pages
nvmap_page_pool_init: nvmap pool = wc, highmem=25725, pool_size=30975,totalram=247805, freeram=184881, totalhigh=56824, freehigh=0
nvmap_page_pool_init: nvmap iwb page pool size=30975 pages
nvmap_page_pool_init: nvmap pool = iwb, highmem=0, pool_size=30975,totalram=247805, freeram=153819, totalhigh=56824, freehigh=0
tegra-nvmap tegra-nvmap: created carveout iram (255KiB)
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 32
host1x host1x: initialized
PMU: registered new PMU device of type 0
Tegra auto-hotplug initialized: disabled
cpu-tegra: init EDP limit: 1250 MHz
PCIE.C: tegra_pcie_enable_regulators : regulator hvdd_pex
PCIE.C: tegra_pcie_enable_regulators : regulator pexio
PCIE.C: tegra_pcie_enable_regulators : regulator avdd_plle
acquiring dock_detect = 164
pci 0000:00:00.0: [10de:0e1d] type 1 class 0x000604
pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:00.0: PME# disabled
PCI: bus0: Fast back to back transfers disabled
pci 0000:01:00.0: [104c:8232] type 1 class 0x000604
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: PME# disabled
PCI: bus1: Fast back to back transfers disabled
pci 0000:02:00.0: [104c:8233] type 1 class 0x000604
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:01.0: [104c:8233] type 1 class 0x000604
pci 0000:02:01.0: supports D1 D2
pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:01.0: PME# disabled
pci 0000:02:02.0: [104c:8233] type 1 class 0x000604
pci 0000:02:02.0: supports D1 D2
pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:02.0: PME# disabled
PCI: bus2: Fast back to back transfers disabled
pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:03:00.0: reg 10: [io 0x0000-0x00ff]
pci 0000:03:00.0: reg 18: [mem 0x00000000-0x00000fff 64bit pref]
pci 0000:03:00.0: reg 20: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
PCI: bus3: Fast back to back transfers disabled
pci 0000:04:00.0: [1033:0194] type 0 class 0x000c03
pci 0000:04:00.0: reg 10: [mem 0x00000000-0x00001fff 64bit]
pci 0000:04:00.0: PME# supported from D0 D3hot
pci 0000:04:00.0: PME# disabled
PCI: bus4: Fast back to back transfers disabled
PCI: bus5: Fast back to back transfers enabled
pci 0000:00:00.0: BAR 8: assigned [mem 0x10000000-0x100fffff]
pci 0000:00:00.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref]
pci 0000:00:00.0: BAR 7: assigned [io 0x10000000-0x10000fff]
pci 0000:01:00.0: BAR 8: assigned [mem 0x10000000-0x100fffff]
pci 0000:01:00.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref]
pci 0000:01:00.0: BAR 7: assigned [io 0x10000000-0x10000fff]
pci 0000:02:00.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref]
pci 0000:02:01.0: BAR 8: assigned [mem 0x10000000-0x100fffff]
pci 0000:02:00.0: BAR 7: assigned [io 0x10000000-0x10000fff]
pci 0000:03:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref]
pci 0000:03:00.0: BAR 4: set to [mem 0x20000000-0x20003fff 64bit pref] (PCI address [0x20000000-0x20003fff])
pci 0000:03:00.0: BAR 2: assigned [mem 0x20004000-0x20004fff 64bit pref]
pci 0000:03:00.0: BAR 2: set to [mem 0x20004000-0x20004fff 64bit pref] (PCI address [0x20004000-0x20004fff])
pci 0000:03:00.0: BAR 0: assigned [io 0x10000000-0x100000ff]
pci 0000:03:00.0: BAR 0: set to [io 0x10000000-0x100000ff] (PCI address [0x10000000-0x100000ff])
pci 0000:02:00.0: PCI bridge to [bus 03-03]
pci 0000:02:00.0: bridge window [io 0x10000000-0x10000fff]
pci 0000:02:00.0: bridge window [mem 0x20000000-0x200fffff 64bit pref]
pci 0000:04:00.0: BAR 0: assigned [mem 0x10000000-0x10001fff 64bit]
pci 0000:04:00.0: BAR 0: set to [mem 0x10000000-0x10001fff 64bit] (PCI address [0x10000000-0x10001fff])
pci 0000:02:01.0: PCI bridge to [bus 04-04]
pci 0000:02:01.0: bridge window [mem 0x10000000-0x100fffff]
pci 0000:02:02.0: PCI bridge to [bus 05-05]
pci 0000:01:00.0: PCI bridge to [bus 02-05]
pci 0000:01:00.0: bridge window [io 0x10000000-0x10000fff]
pci 0000:01:00.0: bridge window [mem 0x10000000-0x100fffff]
pci 0000:01:00.0: bridge window [mem 0x20000000-0x200fffff 64bit pref]
pci 0000:00:00.0: PCI bridge to [bus 01-05]
pci 0000:00:00.0: bridge window [io 0x10000000-0x10000fff]
pci 0000:00:00.0: bridge window [mem 0x10000000-0x100fffff]
pci 0000:00:00.0: bridge window [mem 0x20000000-0x200fffff 64bit pref]
highmem bounce pool size: 64 pages
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
fuse init (API version 7.17)
msgmni has been set to 1492
io scheduler noop registered (default)
mpe mpe: initialized
gr3d gr3d: initialized
gr2d gr2d: initialized
isp isp: initialized
vi vi: initialized
tegradc tegradc.0: probed
Console: switching to colour frame buffer device 170x48
tegradc tegradc.0: probed
nvhdcp: using "always on" policy.
tegradc tegradc.1: probed
tegradc tegradc.1: probed
tegra_uart.1: ttyHS1 at MMIO 0x70006040 (irq = 69) is a TEGRA_UART
Registered UART port ttyHS1
tegra_uart.2: ttyHS2 at MMIO 0x70006200 (irq = 78) is a TEGRA_UART
Registered UART port ttyHS2
tegra_uart.3: ttyHS3 at MMIO 0x70006300 (irq = 122) is a TEGRA_UART
Registered UART port ttyHS3
tegra_uart.4: ttyHS4 at MMIO 0x70006400 (irq = 123) is a TEGRA_UART
Registered UART port ttyHS4
Initialized tegra uart driver
loop: module loaded
i2c-core: driver [apds9802als] using legacy suspend method
i2c-core: driver [apds9802als] using legacy resume method
nct1008_nct72 4-004c: success in enabling rail vdd_nct1008
nct1008_nct72 4-004c: nct1008_probe: initialized
i2c-core: driver [nct1008_nct72] using legacy suspend method
i2c-core: driver [nct1008_nct72] using legacy resume method
Loading pn544 driver
pn544_probe : requesting IRQ 408
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: eth0: RTL8168evl/8111evl at 0xf0800000, 00:00:00:00:00:03, XID 0c900800 IRQ 480
usbcore: registered new interface driver catc
catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
usbcore: registered new interface driver kaweth
pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new interface driver pegasus
rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
usbcore: registered new interface driver rtl8150
usbcore: registered new interface driver asix
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver dm9601
usbcore: registered new interface driver smsc75xx
usbcore: registered new interface driver smsc95xx
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver MOSCHIP usb-ethernet driver
cdc_ncm: 04-Aug-2011
usbcore: registered new interface driver cdc_ncm
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
tegra USB phy - inst[1] platform info:
port_otg: no
has_hostpc: yes
phy_interface: USB_PHY_INTF_UTMI
op_mode: TEGRA_USB_OPMODE_HOST
vbus_gpio: -1
vbus_reg: NULL
hot_plug: disabled
remote_wakeup: enabled
Timed out waiting for lock bit on pll pll_u
tegra-ehci tegra-ehci.1: Tegra EHCI Host Controller
tegra-ehci tegra-ehci.1: new USB bus registered, assigned bus number 1
tegra-ehci tegra-ehci.1: irq 53, io mem 0x7d004000
tegra-ehci tegra-ehci.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: Tegra EHCI Host Controller
usb usb1: Manufacturer: Linux 3.1.10-gfc993d9 ehci_hcd
usb usb1: SerialNumber: tegra-ehci.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
tegra USB phy - inst[2] platform info:
port_otg: no
has_hostpc: yes
phy_interface: USB_PHY_INTF_UTMI
op_mode: TEGRA_USB_OPMODE_HOST
vbus_gpio: -1
vbus_reg: vdd_vbus_typea_usb
hot_plug: enabled
remote_wakeup: enabled
tegra-ehci tegra-ehci.2: Tegra EHCI Host Controller
tegra-ehci tegra-ehci.2: new USB bus registered, assigned bus number 2
tegra-ehci tegra-ehci.2: irq 129, io mem 0x7d008000
tegra-ehci tegra-ehci.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: Tegra EHCI Host Controller
usb usb2: Manufacturer: Linux 3.1.10-gfc993d9 ehci_hcd
usb usb2: SerialNumber: tegra-ehci.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:04:00.0: irq 130, io mem 0x10000000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.1.10-gfc993d9 xhci_hcd
usb usb3: SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.1.10-gfc993d9 xhci_hcd
usb usb4: SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver cdc_wdm
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
usbcore: registered new interface driver usbserial
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
Nvidia Tegra High-Speed USB SOC Device Controller driver (Apr 30, 2012)
tegra USB phy - inst[0] platform info:
port_otg: yes
has_hostpc: yes
phy_interface: USB_PHY_INTF_UTMI
op_mode: TEGRA_USB_OPMODE_DEVICE
vbus_pmu_irq: 0
vbus_gpio: -1
charging: disabled
remote_wakeup: disabled
tegra-udc tegra-udc.0: usb_bat_chg regulator not registered: USB charging will not be enabled
tegra-otg tegra-otg: SUSPEND --> PERIPHERAL
mousedev: could not register psaux device, error: -16
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver xpad
atmel_mxt_ts 1-005a: Config CRC read from the mXT: A24D9A
atmel_mxt_ts 1-005a: Matching CRC's, skipping CFG load.
atmel_mxt_ts 1-005a: Initialised power cfg: ACTV 255, IDLE 255
atmel_mxt_ts 1-005a: Family ID: 160 Variant ID: 0 Version: 16 Build: 170
atmel_mxt_ts 1-005a: Matrix X Size: 0 Matrix Y Size: 0 Object Num: 18
usb 2-1: new full speed USB device number 2 using tegra-ehci
input: atmel-maxtouch as /devices/platform/tegra-i2c.1/i2c-1/1-005a/input/input0
rtc_tps6591x rtc_tps6591x.0: RTC Time : 11/28/2012 23:39:36
tps6591x 4-002d:
getting alarm time::
rtc_tps6591x rtc_tps6591x.0: RTC Time : 1/1/2000 0:0:0
using rtc device, rtc_tps6591x, for alarms
rtc_tps6591x rtc_tps6591x.0: rtc core: registered rtc_tps6591x as rtc0
usb 2-1: New USB device found, idVendor=046d, idProduct=c223
rtc_tps6591x rtc_tps6591x.0: RTC Time : 11/28/2012 23:39:36
usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-1: Product: G15 Keyboard Hub
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
i2c /dev entries driver
i2c i2c-2: Added multiplexed i2c bus 6
i2c i2c-2: Added multiplexed i2c bus 7
i2c i2c-2: Added multiplexed i2c bus 8
i2c i2c-2: Added multiplexed i2c bus 9
pca954x 2-0070: registered 4 multiplexed busses for I2C switch pca9546
lirc_dev: IR Remote Control driver registered, major 244
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR RC5 (streamzap) protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
IR LIRC bridge handler initialized
Linux video capture interface: v2.00
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
trpc_sema_init: registered misc dev 10:55
trpc_node_register: Adding 'local' to node list
nvavp nvavp: allocated IOVM at ff00000 for AVP os
tegra_camera tegra_camera: tegra_camera_probe
i2c-core: driver [bq20z75-battery] using legacy suspend method
i2c-core: driver [bq20z75-battery] using legacy resume method
bq27x00-battery 4-0055: support ver. 1.2.0 enabled
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: [email protected]
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCILL protocol initialized
Bluetooth: BlueSleep Mode Driver Ver 1.1
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: Invalid maximum block size, assuming 512 bytes
mmc0: no vmmc regulator found
mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA
sdhci-tegra sdhci-tegra.2: vddio_sd_slot regulator not found: -19. Assuming vddio_sd_slot is not required.
mmc1: Invalid maximum block size, assuming 512 bytes
mmc1: no vmmc regulator found
mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA
mmc2: Invalid maximum block size, assuming 512 bytes
mmc2: no vmmc regulator found
mmc2: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA
tegra-se tegra-se: tegra_se_probe: complete
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
mmc0: new high speed DDR MMC card at address 0001
mmcblk mmc0:0001: Card claimed for testing.
mmcblk0: mmc0:0001 SEM16G 14.8 GiB
wm8903 4-001a: WM8903 revision C
mmcblk0boot0: mmc0:0001 SEM16G partition 1 1.00 MiB
mmcblk0boot1: mmc0:0001 SEM16G partition 2 1.00 MiB
Primary GPT is invalid, using alternate GPT.
mmcblk0: p1 p2 p3 p4 p5
mmcblk0boot1: unknown partition table
mmcblk0boot0: unknown partition table
usb 2-1.1: new low speed USB device number 3 using tegra-ehci
mmc1: queuing unknown CIS tuple 0x80 (50 bytes)
mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
usb 2-1.1: New USB device found, idVendor=046d, idProduct=c226
usb 2-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-1.1: Product: G15 Gaming Keyboard
input: G15 Gaming Keyboard as /devices/platform/tegra-ehci.2/usb2/2-1/2-1.1/2-1.1:1.0/input/input1
generic-usb 0003:046D:C226.0001: input: USB HID v1.10 Keyboard [G15 Gaming Keyboard] on usb-tegra-ehci.2-1.1/input0
asoc: wm8903-hifi tegra30-i2s.1 mapping ok
asoc: dit-hifi tegra30-spdif mapping ok
asoc: dit-hifi tegra30-i2s.3 mapping ok
input: G15 Gaming Keyboard as /devices/platform/tegra-ehci.2/usb2/2-1/2-1.1/2-1.1:1.1/input/input2
generic-usb 0003:046D:C226.0002: input: USB HID v1.10 Device [G15 Gaming Keyboard] on usb-tegra-ehci.2-1.1/input1
input: tegra-wm8903 Mic Jack as /devices/platform/tegra-snd-wm8903.0/sound/card0/input3
input: tegra-wm8903 Headphone Jack as /devices/platform/tegra-snd-wm8903.0/sound/card0/input4
ALSA device list:
#0: tegra-wm8903
oprofile: using arm/armv7-ca9
GACT probability NOT on
Mirror/redirect action on
mmc1: queuing unknown CIS tuple 0x02 (1 bytes)
mmc1: new SDIO card at address 0001
u32 classifier
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (15487 buckets, 61948 max)
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
xt_time: kernel timezone is -0000
usb 2-1.4: new full speed USB device number 4 using tegra-ehci
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 10
Mobile IPv6
ip6_tables: (C) 2000-2006 Netfilter Core Team
usb 2-1.4: New USB device found, idVendor=046d, idProduct=c227
usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-1.4: Product: G15 GamePanel LCD
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
input: G15 GamePanel LCD as /devices/platform/tegra-ehci.2/usb2/2-1/2-1.4/2-1.4:1.0/input/input5
generic-usb 0003:046D:C227.0003: input: USB HID v1.11 Keypad [G15 GamePanel LCD] on usb-tegra-ehci.2-1.4/input0
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
NET: Registered protocol family 37
Registering the dns_resolver key type
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
Registering SWP/SWPB emulation handler
Disabling clocks left on by bootloader:
dsi2-fixed
dsi1-fixed
uarta
fuse_burn
cclk_lp
pll_x_out0
pll_d2_out0
pll_p_out2
pll_c_out1
pll_m_out1
CPU rate: 1000 MHz
DVFS: Got RTC device name:rtc0
rtc_tps6591x rtc_tps6591x.0: RTC Time : 11/28/2012 23:39:38
TEGRA: Linear age: 8
tegra_dvfs: vdd_cpu: stats above 1237 mV will be squashed
tegra dvfs: tegra sysfs cap interface is initialized
tegra_actmon.emc: Completed initialization (0)
tegra_actmon.avp: Completed initialization (0)
regulator_init_complete: fixed_reg_en_vdd_bl2: disabling
gpio_set_debounce: gpio-261 status -22
input: gpio-keys as /devices/platform/gpio-keys.0/input/input6
rtc_tps6591x rtc_tps6591x.0: RTC Time : 11/28/2012 23:39:38
rtc_tps6591x rtc_tps6591x.0: setting system clock to 2012-11-28 23:39:38 UTC (1354145978)
Waiting for root device /dev/mmcblk1p1...
mmc2: new ultra high speed DDR SDHC card at address 0007
mmcblk mmc2:0007: Card claimed for testing.
mmcblk1: mmc2:0007 SD32G 29.8 GiB
mmcblk1: p1
kjournald starting. Commit interval 5 seconds
EXT3-fs (mmcblk1p1): using internal journal
EXT3-fs (mmcblk1p1): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) on device 179:49.
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
udevd[194]: starting version 175
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
Tegra auto-hotplug enabled
CPU1: shutdown
CPU1: Booted secondary processor
Switched to NOHz mode on CPU #1
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
wifi_set_power = 1
i2c i2c-2: mpu_probe: 0
ov5650 sensor driver loading
left_ov5650_probe: probing sensor.
i2c i2c-2: Installing irq using 409
i2c i2c-2: Module Param interface = mpuirq
i2c-core: driver [mpu3050] using legacy suspend method
i2c-core: driver [mpu3050] using legacy resume method
mpu_init: Probe name mpu3050
ov2710 sensor driver loading
ov2710: probing sensor.
right_ov5650_probe: probing sensor.
i2c i2c-2: ak89xx_mod_probe: ak8975
i2c i2c-2: inv_mpu_register_slave: +ak89xx Type 2: Addr: c IRQ: 0, Adapt: 2
i2c i2c-2: ak89xx irq not assigned: 0 -1089554064 0
ak89xx_mod_init: Probe name ak89xx_mod
i2c i2c-2: kxtf9_mod_probe: kxtf9
i2c i2c-2: inv_mpu_register_slave: +kxtf9 Type 1: Addr: f IRQ: 0, Adapt: 2
i2c i2c-2: kxtf9 irq not assigned: 0 -1089554076 0
kxtf9_mod_init: Probe name kxtf9_mod
ak8975_mod_init: Probe name ak8975_mod
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
wifi_set_carddetect = 1
bcmsdh_sdmmc: probe of mmc1:0001:1 failed with error -110
mmc1: card 0001 removed
init: Failed to create pty - disabling logging for job
Dongle Host Driver, version 4.218.248.23
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
mmc1: queuing unknown CIS tuple 0x80 (50 bytes)
mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
mmc1: queuing unknown CIS tuple 0x02 (1 bytes)
mmc1: new SDIO card at address 0001
DHD: dongle ram size is set to 294912(orig 294912)
_dhdsdio_download_firmware: dongle image file download failed
dhd_bus_start: dhdsdio_probe_download failed. firmware = /lib/firmware/bcm4329/fw_bcm4329.bin nvram = /lib/firmware/nvram_4329.txt
dhdsdio_probe: failed
init: plymouth main process (104) killed by SEGV signal
init: plymouth-splash main process (326) terminated with status 2
r8169 0000:03:00.0: eth0: link down
r8169 0000:03:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
CPU1: shutdown
r8169 0000:03:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
CPU2: shutdown
CPU3: shutdown
CPU1: Booted secondary processor
Switched to NOHz mode on CPU #1
init: failsafe main process (379) killed by TERM signal
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: Failed to create pty - disabling logging for job
init: Temporary process spawn error: No such file or directory
init: plymouth-stop pre-start process (535) terminated with status 1
CPU2: Booted secondary processor
Switched to NOHz mode on CPU #2
CPU1: shutdown
CPU2: shutdown
eth0: no IPv6 routers present
CPU1: Booted secondary processor
Switched to NOHz mode on CPU #1
CPU1: shutdown
tegra-otg tegra-otg: PERIPHERAL --> SUSPEND
cpu-tegra: force EDP limit 1300000 kHz
CPU1: Booted secondary processor
Switched to NOHz mode on CPU #1
CPU2: Booted secondary processor
Switched to NOHz mode on CPU #2
CPU3: Booted secondary processor
Switched to NOHz mode on CPU #3
CPU1: shutdown
CPU1: Booted secondary processor
Switched to NOHz mode on CPU #1
CPU1: shutdown
CPU1: Booted secondary processor
Switched to NOHz mode on CPU #1
CPU1: shutdown
cpu-tegra: force EDP limit 1200000 kHz
CPU1: Booted secondary processor
Switched to NOHz mode on CPU #1
CPU1: shutdown
cpu-tegra: force EDP limit 1200000 kHz
CPU1: Booted secondary processor
Switched to NOHz mode on CPU #1
CPU1: shutdown
CPU2: shutdown
CPU3: shutdown
cpu-tegra: force EDP limit 1300000 kHz
CPU1: Booted secondary processor
Switched to NOHz mode on CPU #1
CPU2: Booted secondary processor
Switched to NOHz mode on CPU #2
cpu-tegra: force EDP limit 1200000 kHz
CPU3: Booted secondary processor
Switched to NOHz mode on CPU #3
CPU3: shutdown
cpu-tegra: force EDP limit 1200000 kHz
CPU3: Booted secondary processor
Switched to NOHz mode on CPU #3
CPU3: shutdown
cpu-tegra: force EDP limit 1200000 kHz
CPU3: Booted secondary processor
Switched to NOHz mode on CPU #3
CPU3: shutdown
cpu-tegra: force EDP limit 1200000 kHz
CPU3: Booted secondary processor
Switched to NOHz mode on CPU #3
CPU3: shutdown
cpu-tegra: force EDP limit 1200000 kHz
CPU3: Booted secondary processor
Switched to NOHz mode on CPU #3
CPU3: shutdown
cpu-tegra: force EDP limit 1200000 kHz
CPU3: Booted secondary processor
Switched to NOHz mode on CPU #3
CPU3: shutdown
cpu-tegra: force EDP limit 1200000 kHz
CPU3: Booted secondary processor
Switched to NOHz mode on CPU #3
CPU3: shutdown
cpu-tegra: force EDP limit 1200000 kHz
CPU3: Booted secondary processor
Switched to NOHz mode on CPU #3
CPU3: shutdown
CPU1: shutdown
CPU1: Booted secondary processor
Switched to NOHz mode on CPU #1
cpu-tegra: force EDP limit 1200000 kHz
CPU3: Booted secondary processor
Switched to NOHz mode on CPU #3
CPU3: shutdown
cpu-tegra: force EDP limit 1200000 kHz
CPU3: Booted secondary processor
Switched to NOHz mode on CPU #3
CPU3: shutdown
cpu-tegra: force EDP limit 1200000 kHz
CPU3: Booted secondary processor
Switched to NOHz mode on CPU #3
CPU3: shutdown
CPU1: shutdown
CPU2: shutdown
cpu-tegra: force EDP limit 1300000 kHz
CPU1: Booted secondary processor
CPU2: Booted secondary processor
Switched to NOHz mode on CPU #2
Switched to NOHz mode on CPU #1
CPU3: Booted secondary processor
Switched to NOHz mode on CPU #3
------------[ cut here ]------------
WARNING: at /dvs/git/dirty/git-master_linux-k310/kernel/kernel/workqueue.c:1953 process_one_work+0x384/0x4f4()
Modules linked in: snd_hda_codec_hdmi snd_hda_intel snd_hda_codec inv_mpu_ak8975 inv_mpu_kxtf9 inv_mpu_ak89xx ov2710 ov5650 mpu3050 sh532u tps61050 bcm4329
[] (unwind_backtrace+0x0/0x104) from [] (dump_stack+0x20/0x24)
[] (dump_stack+0x20/0x24) from [] (warn_slowpath_common+0x5c/0x74)
[] (warn_slowpath_common+0x5c/0x74) from [] (warn_slowpath_null+0x2c/0x34)
[] (warn_slowpath_null+0x2c/0x34) from [] (process_one_work+0x384/0x4f4)
[] (process_one_work+0x384/0x4f4) from [] (process_scheduled_works+0x34/0x44)
[] (process_scheduled_works+0x34/0x44) from [] (rescuer_thread+0x18c/0x24c)
[] (rescuer_thread+0x18c/0x24c) from [] (kthread+0xb0/0xb8)
[] (kthread+0xb0/0xb8) from [] (kernel_thread_exit+0x0/0x8)
---[ end trace 4afb5dbff5e19111 ]---
CPU1: shutdown
CPU2: shutdown
CPU1: Booted secondary processor
Switched to NOHz mode on CPU #1
cpu-tegra: force EDP limit 1200000 kHz
CPU2: Booted secondary processor
Switched to NOHz mode on CPU #2
CPU2: shutdown
CPU1: shutdown
CPU3: shutdown
cpu-tegra: force EDP limit 1300000 kHz
CPU1: Booted secondary processor
CPU2: Booted secondary processor
Switched to NOHz mode on CPU #2
Switched to NOHz mode on CPU #1
cpu-tegra: force EDP limit 1200000 kHz
CPU3: Booted secondary processor
Switched to NOHz mode on CPU #3
CPU3: shutdown
CPU1: shutdown
CPU2: shutdown
cpu-tegra: force EDP limit 1300000 kHz
CPU1: Booted secondary processor
Switched to NOHz mode on CPU #1
CPU1: shutdown
cpu-tegra: force EDP limit 1300000 kHz
CPU1: Booted secondary processor
Switched to NOHz mode on CPU #1
CPU1: shutdown
cpu-tegra: force EDP limit 1300000 kHz
CPU1: Booted secondary processor
Switched to NOHz mode on CPU #1
CPU1: shutdown
cpu-tegra: force EDP limit 1300000 kHz
CPU1: Booted secondary processor
Switched to NOHz mode on CPU #1
CPU1: shutdown